D-link managed Gigabit Switch 28 Ports

---

D-Link
DGS-3224TGR Gigabit Ethernet Switch

- Voor inbouw in 19" serverkast, zijbeugels zijn te demonteren
- Ventilator vervangen (Origineel), dus geen rammelende ventilator.
- manage via webbrowser of RS232


This section describes the features of the DGS-3224TGR.
Features
The DGS-3224TGR was designed for departmental and enterprise connections. As an all-gigabit-port switch, it is ideal for
backbone and server connection. Powerful and versatile, the switch eliminates network bottlenecks while giving users the
capability to fine-tune performance
Switch features include:
Ports
Twenty-four high performance 1000BASE-T ports for making 10/100/1000 connections to a backbone, end stations,
and servers.
Four mini-GBIC (SFP) combo ports to connect fiber optic media to another switch, server or network backbone.
RS-232 DCE Diagnostic port (console port) for setting up and managing the Switch via a connection to a console
terminal or PC using a terminal emulation program.
Performance Features
Store-and-forward switching scheme.
Switching fabric: 48Gbps
Max. Forwarding Rate: 35.7 million packets per second
High-speed data forwarding rate of 1,488,095 pps per port at 100% of wire-speed for 1000 Mbps speed.
Supports 16K MAC address.
Supports eight priority queues per port.
Supports 2Mbytes buffer memory per switch.
Jumbo Frame support (up to 9216 bytes).
Multi-layer (Layer 2 to Layer 4) ACL and CoS support.
Administrator-definable port security.
802.1D Spanning Tree support. Can be disabled on the entire switch or on a per-port basis.
802.1w Rapid Reconfiguration of Spanning Tree.
802.1Q Tagged VLAN support, including GVRP (GARP VLAN Registration Protocol).
Support for up to 255 VLANs.
IGMP snooping support per switch and fast-leave.
Link aggregation support for up to 32 trunk groups and 8 trunk members per group. Support LACP and Static mode.
Both port-based and MAC-based 802.1x port access control.
Per-port bandwidth control.

Management
RS-232 console port for out-of-band network management via a console terminal.
Spanning Tree Algorithm Protocol for creation of alternative backup paths and prevention of network loops.
SNMP V.1, V2c1, and V3 network management, 4 groups of RMON.
Flash memory for software upgrades. This can be done in-band via TFTP or out-of-band via the console.
Built-in SNMP management:
Bridge MIB (RFC 1493)
MIB-II (RFC 1213)
802.1P/Q MIB (RFC 2674)
Interface MIB (RFC 2233)
Ethernet-like MIB (RFC 1643)
Mini-RMON MIB (RFC 1757) 4 groups. The RMON specification defines the counters for the receive
functions only. However, the DGS-3224TGR provides counters for both receive and transmit functions.
Supports Web-based management.
TFTP support.
BOOTP support.
DHCP Client support.
Password enabled.
Telnet remote control console.
Broadcast storm control.
Multicast storm control.
Command Line Interface support.
Port security support.
TACACS and TACACS+ protocol support.
SYSLOG support.
Destination Lookup Fail control.
SSL support.
Single IP Management v1.0 support.